NMD Endo Endo-Z Tungsten Carbide Burs Access cavity enlarging bur with non-cutting tip

• The Endo-Z’s long tapered configuration allows easy access to the canal orifices and funnel shaping of the chamber walls.
• It’s six specially designed tungsten-carbide spiral blades cut cleanly while lifting debris coronally along it’s flutes.
• Non-cutting tip prevents damage to the chamber floor or walls.
• Fast and efficient cutting
• Non-heating
• Sturdy built

Endo-Z Tungsten carbide Bur is long tapered configuration allows easy access to the canal orifices and funnel shaping of the chamber walls. It’s six specially designed tungsten-carbide spiral blades cut cleanly while lifting debris coronally along it’s flutes. The non-cutting tip helps prevent damage to the chamber floor or walls.

After initial penetration, the long, tapered Endo-Z bur can be used to create a funnel shape for easier access in the pulp chamber. The rounded, non-cutting, safe-ended tip prevents penetration of the pulp chamber floor or the root canal walls.

• Shank Material : Tungsten Carbide by Titanium Layer
• Working head material: Tungsten carbide
• Head Diameter : Φ1.4mm
• Overall Length: 25mm
• Autoclavable upto 134°C

• 1 x Endo-Z Tungsten Carbide Bur

• Insert the instrument as deeply as possible into the chuck (Friction Grip).
• Set the handpiece at the required working speed before applying the instrument to the treated area.
• Apply a maximum operating force of 0.4 [N] and do not exceed a speed of 230’000 [rpm].
• Activate water spray during the entire treatment (minimum 50 mL/min).
• Regulate water flow in case of water excess or shortage.
• It is recommended to use a dental dam.
• Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
• Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
• It is recommended to wear gloves and safety glasses.